New doors · Riverside County
A door is the biggest thingon the front of your house.
Four tiers, from plain steel to made-to-order cedar. Every photograph below is a door we hung, on a real driveway in this county. No catalogue renders, no manufacturer stock shots.
Proof
This one came downand went back up the same day.
Every panel had buckled and the whole assembly had come into the opening. We cleared it, rebuilt the frame and hung a new insulated steel door before the afternoon was out.
Drag the handle left to right. We only publish pairs shot from the same spot.
Four tiers
From plain steelto made-to-order cedar.
Each tier below sits at a different point on cost, upkeep and how much the door changes the house. Bo will tell you honestly which one your property needs, including when the cheapest one is the right answer.
Steel
The one most Riverside homes should buy. Galvanised steel with a baked finish, insulated or not, in a panel style to match the house. It resists the heat, it does not warp, and it needs nothing from you but a wipe down.
- Best forAlmost every home
- FinishBaked enamel, wide colour range
- InsulationNone, polystyrene or polyurethane
- MaintenanceWash it occasionally
- LifespanTwenty to thirty years in this climate
Wood-grain steel
Steel with a timber grain pressed into it and a stained finish over the top. From the kerb it reads as wood. Up close it reads as a very good imitation. It costs a fraction of real timber and it never needs refinishing.
- Best forKerb appeal without upkeep
- FinishEmbossed grain, stained overlay
- HardwareBlack strap hinges and handles optional
- WindowsTop row, plain or leaded
- MaintenanceNone beyond a wash
Real wood
Cedar or mahogany, built to order, on a steel backing frame. There is no substitute for it on a period or high-end property and everyone can tell. It also needs refinishing every few years in Inland Empire sun, and we will say so before you buy.
- Best forPeriod homes and high-end builds
- SpeciesCedar, mahogany, redwood
- Lead timeMade to order, allow several weeks
- MaintenanceRefinish every three to five years
- NoteHeavier — the opener may need upgrading
Glass and aluminium
A full-view door: anodised aluminium frame with frosted, tinted or clear glazing. It floods a garage with daylight and it belongs on a modern build. It is the one tier where the door changes the whole elevation rather than matching it.
- Best forModern architecture, workshops
- FrameAnodised aluminium, black or clear
- GlazingFrosted, tinted, clear or acrylic
- LightTransforms a dark garage
- NoteHeavier than steel — springs sized accordingly
What is included
Everything exceptthe surprises.
- The measure is free and so is the quote
- Removal and disposal of the old door and hardware
- New tracks, rollers, springs and hardware sized to the new door
- Balance and safety testing before we leave
- The opener quoted separately, and only if it actually needs replacing
How a replacement goes
- Bo measures the openingHeadroom, sideroom, backroom and the existing hardware. In person, on your driveway, at no charge.
- You choose the doorMaterial, panel style, windows, hardware and colour. Take as long as you like — nobody will chase you.
- We order and fit itSteel is usually days. Timber and glass are made to order. Fitting is typically half a day.
- The old one leaves with usDoor, tracks, hardware and packaging. Nothing left stacked beside your bins.
Nothing is charged for step one. Measuring a door and telling you what it needs is not a service we bill for.
Book a free measureand see what it costs.
Bo measures the opening himself and prices it in front of you. The visit costs nothing and there is no obligation at the end of it.
Why the measure matters
- Openings are rarely standardEspecially on older Riverside builds. A door ordered off a tape measure is a door that does not fit.
- Headroom decides the hardwareLow headroom needs a different track and sometimes a different opener entirely.
- The old hardware tells a storyWhat failed last time usually explains what to specify this time.
Questions
Before you spendthat kind of money.
Ten things worth knowing before you choose a door, including the ones that argue against the expensive option.
Ring and ask. Bo has hung doors in this county for over thirty years and there is no charge for a question.
(951) 232-9778Mon–Sat · 8am–6pmDo I need a smart garage door opener?
Only if you want to see or control the door from your phone. It is genuinely useful for deliveries and for anyone who regularly wonders whether they left it open. It makes no difference to how well the door runs.
How long does a new garage door take to install?
A standard single or double door is usually a half-day once the door is on site. Custom timber and full-view glass doors are made to order and take longer to arrive, though the fitting itself is much the same.
Should I insulate my garage door in Riverside?
It is worth it if the garage is attached to living space or you use it as a workshop. An insulated door will not air-condition the garage, but it takes the edge off afternoon heat soak and it is noticeably quieter to operate.
If the garage is detached and used for storage, the money is usually better spent on the door itself than on the insulation rating.
What is R-value on a garage door?
A measure of how well the door resists heat transfer, with higher numbers meaning better insulation. Values range from about 6 on a basic insulated steel door to 18 or more on a polyurethane-filled one. It only matters if the garage is conditioned or attached.
Steel or wood garage door: which is better?
Steel for almost everyone. It costs less, resists warping in Inland Empire heat, and modern wood-grain finishes are convincing from the kerb. Real timber looks better close up and suits period or high-end homes, but it needs refinishing every few years.
Can you replace just one panel of my garage door?
Sometimes. It depends on whether your model is still in production and whether the colour still matches after years of sun. On doors older than about fifteen years a match is unlikely, and replacement usually makes better financial sense.
Do I need a new opener with a new door?
Not usually. A working opener will run a new door as long as the weight is similar. If you are moving from a light uninsulated door to a heavy insulated or timber one, the opener may need upgrading, and we will tell you before you buy.
Do you take the old garage door away?
Yes. Removal and disposal of the old door and hardware is included in every replacement we quote. You will not find it stacked beside the bins after we leave.
How long should a new garage door last?
Twenty to thirty years for the door itself in this climate. The moving parts wear out much sooner: springs at seven to twelve years, rollers around ten, and openers between ten and fifteen. Those are maintenance items, not door failures.
Does the heat in Riverside affect my garage door?
Yes, in two ways. Repeated expansion and contraction loosens hardware faster than in milder climates, so bolts and brackets need checking. And an uninsulated steel door on a west-facing garage radiates a lot of heat into the space behind it.